Home    Contact    
• DOOR
  Steel Roll-Up
     Steel
     Weatherized
     Insulated
     26 Guage Light Duty
  Aluminum Roll-Up
     Aluminum
     Insulated
     Grille
     Panel
     Lexan
     Lexan Panel
     Combination
     High Speed Door
  Counter Roll-Up
     Steel
     Aluminum
     Stainless Steel
  High Speed Roll-Up
     Aluminum
     Grille
     Steel
  Fire Rated Roll-Up
  Folding Closure
  Overhead Sectional
  Strip Door
  Swing Door
• OPERATOR
  Motor Operation
     Jackshaft
     Gearhead
     Hoist
     High Speed
     Tubular
     T-Motor Accessories
  Accessories
JACKSHAFT OPERATOR: MODEL J  

* AUTHORIZED LIFTMASTER DEALER
* JACKSHAFT
* GEARHEAD
* HOIST
* HIGH SPEED
* AUTHORIZED SIMU SOMFY DEALER

LOGIC 5.0 JACKSHAFT COMMERCIAL DOOR OPERATORS
ARE OPTIMAL FOR INDUSTRIAL APPLICATIONS

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage. The door operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles. J Operators are attached to the door jackshaft to indirectly dirve the door.

STANDARD FEATURES
- Dual Voltage Connections
- Floor Level Disconnect
- Control function selector dial
- Timer-to-close
- Continuous-duty high-starting torque motor
- Motor removable without affecting limit switch settings
- Adjustable friction clutch
- Mid-stop
- Maximum run timer
- Delay-on-reverse circuit
- 3-Button control station with maintenance alert system (MAS)
- Security+2.0TM Radio Receiver
- Continuous-duty high-starting torque motor with instant reverse and overlod protection
- Operators are factory preset to C2 wiring
- First-stage heavey-duty 5L V-belt: second-third-fourth stages #48chain; #50 output sprocket chain
- Industrial ball bearings on 1" output shaft; heavy-duty oil-filled bushings on reduction shafts
- Brake standard on 3/4 and 1HP operators (optional on 1/2 HP, not available on 1/3 HP
- Left or right hand mounting (must specify at time of order)
- NEMA 1 rated type electrical box, heavy-duty 11-gauge steel frame
- All reduction sprockets drilled and pinned to shafts
- Door speed: 8-9 in. per second
- Approximate shipping weight 95 Lbs.

OVERALL DIMENSIONS



Jackshaft Operator distributed by LIFTMASTER.












13202 ARCTIC CIRCLE SANTA FE SPRINGS, CA 90670  •  TEL. 562.802.2233  •  TOLL FREE. 800.400.2565  •  BESTROLLUP@GMAIL.COM
COPYRIGHT © 2014  BESTROLLUP.COM  All RIGHTS RESERVED